spec no: dsaa5349 rev no: v.8 date: jul/31/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: s.h.chen package dimension s kpc - 3216sgc super bright green description the super bright green source color devices are made with gallium phosphide green light emitting diode. 3 .2x1.6mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is ? .2(0.0079") unless otherwise noted. 3.specifications are subject to change without notice. features z 3.2x1.6mm smt led, 1.1mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package: 2000pcs / reel . z rohs compliant.
spec no: dsaa5349 rev no: v.8 date: jul/31/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: s.h.chen selection guid e electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 kpc - 3216sgc super bright green (gap) water clear 4 15 120 note: 1. 1/10 duty cycle, 0.1ms pulse width. n ote: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. symbol parameter device typ. max. test conditions units peak peak wavelength super bright green 565 nm i f =20ma d dominant wavelength super bright green 568 nm i f =20ma ? 1/2 spectral line half - width super bright green 30 nm i f =20ma c capacitance super bright green 15 pf v f =0v;f=1mhz v f forward voltage super bright green 2.2 2.5 v i f =20ma i r reverse current super bright green 10 ua v r = 5v parameter super bright green units power dissipation 105 mw dc forward current 25 ma peak forward current [1] 140 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaa5349 rev no: v.8 date: jul/31/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: s.h.chen super bright green kpc - 3216sgc
spec no: dsaa5349 rev no: v.8 date: jul/31/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: s.h.chen recommended soldering pattern (units : mm ) tape specifications (units : mm ) kpc - 3216sgc remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
